Flower pot mould

 Flower pot mould

In the future, there is a lot of room for development, because the modern people's lifestyle is slowly transformed into self-cultivation, and flower cultivation has become a hobby in their lives. Flower pots are produced through injection molds, with short production cycle, large output, and long tool life. . Flower pot molds will be manufactured by more and more people.

1. The flower pot mould has the bottom touch perforation and the side wall touch perforation to achieve water leakage (to prevent too much watering at one time to make the flowers rotten). The bottom leakage design is directly through the direct core cavity, and the punching cannot be too small, because it is too small to require high-precision machining, and the cost will increase. The sidewall leakage design uses the cylinder core to achieve the collision, which is a challenge to the complexity of the mold structure. The production cycle of the product will also be lengthened.

2. The economic benefits brought by the flower pot mold. A pot of flowers may have a profit of 70%, but if you add a pot, their overall profit may be 120%. Contemporary people will pursue more and more quality life.

3. Notes on the manufacture of flower pot moulds (1)Pay attention to the height of product stacking in the early stage. (2) Pay attention to the drafting degree to prevent the cavity from being pulled. The appearance of the product is like the stroke of the knife. (3) Pay attention to the injection pressure. If the pressure is too high, the mould life will be shortened.

4. The appearance of the flower pot can be made into a mirror surface, or it can be made into a leather pattern. It can also be the same as the provided picture. It can also add company LOGO by thermal transfer.

5. Flower pot mould demoulding method: (1): The punched and perforated holes around the four sides of cavity move through the cylinder. There are two valves in the cavity to prevent the product from being stick on the cavity. The core valve + the side gas + the stripping plate are ejected to realize the automatic removal of the mould, and it can also be grasped by the robot. (2): The core and cavity are directly penetrated, which is economical and affordable. The mould production cycle is also short which can bring faster and greater profit margins to customers.

Any new mould projects, welcome to inquiry by whatsapp or mob: 86-13867644770



评论

此博客中的热门博文

How to set your injection molding machine parameters?

What Is Plastic Injection Mold?

PLASTIC BUS CHAIR MOULD